With the spring's coming, the enthusiasts of water equipment begin imagining themselves being in the open of water mirror-like surface in their dreams. For you to be not disappointed with your first appearance on water space, you should prepare yourself to the season expected. Goods for hunting and fishing sold on the Internet allow choosing a boat and engine for all tastes.
Having removed a boat from the place it was being kept during winter, we fill its balloons until their pressure becomes proper (as a rule, it is of 20-25 bars, and for the keel, it should be 30-35 bars). For a precise measurement of balloons' pressure, it is desirable your having a dedicated pressure manometer.
After filling balloons to working pressure, we proceed with examining a boat. We explore transom regarding possible damages. Despite the fact that it was made of waterproof plywood, its fractures, dints and deep scratches should be polished with dedicated remedies. Particular attention should be paid to the places where the transom is stuck to the boat, and integrity of seats and rowlocks. Having ended examining attached implements, we must proceed to explore the boat itself.
On the boats made of PVC materials, clamped-type valves are fitted. It is needed to make sure that all valves work in a routine mode. To make that we can press each of them by turns, and after air begins to escape, pressing force should be weakened. Air leaking should cease immediately. If a valve doesn't hold pressure and cleaning from litter didn't help, the valve should be replaced. During the exploitation period, the valve should be closed with a dedicated cover.
After that, we check the boat regarding possible mechanical defects. If having discovered punctures of small size, we should eliminate them immediately. If you have discovered some sizable scuffs (cloth snagging) they also should be glued. Then we should make sure that all joins and joints of the boat are hermetically sealed, if needed, repairing should be performed. If you have discovered an abruption (cut) with the length of more than 2 cm, it is better to appeal to service workshop, where professional and quality repair will be executed.
Goods for hunting and fishing on the Internet: an outboard engine
An outboard engine is the heart of a boat. The mobility potential of your moving, your safety, and state of mind depend on the reliability and absence of failures (especially at large aquatic areas). If you have a possibility to apply to a service center, I recommend transporting your engine there. If you have not any possibility to take advantage of a center service, it is obligingly to take the following actions: having taken the engine from keeping for winter and conservation, we must hang it in such a way, that it would be convenient to undertake prevention measures. Having lifted off the caps, we should examine the engine regarding outer defects. Using corresponding tools, we tighten bolts and nuts. We lubricate all rubbing engines parts. Using a medical syringe with lubricant, we execute injection of those places were that manipulations are supposed. Before the start of the season, it is desirable to replace the oil in the speed-reduction gear, especially in those of four-stroke engines and engine crankcase.